AMT 2ES30C-3P 2" cast Iron Straight Centrifugal End Suct. Chem Pump, EPDM/EPR Seal, 3hp, 3 Phase

AMT 2ES30C-3P 2" cast iron centrifugal end suction pump with EPDM/EPR Mechanical Seal. 3 HP TEFC (Totally Enclosed, Fan Cooled), 3 Phase, 208-230/460 VAC/60 Hz, 8/4 Full Load Amps, 56J Frame Motor. AMT Solids Handling end suction centrifugal pump are designed for continuous-duty OEM, Industrial/Commercial and General Service applications including circulation, chemical processing, liquid transfer and cooling. Pull-from-rear design for easy service without disturbing any piping. Self-cleaning impellers to prevent clogging and handles solids up to 3/8" diameter depending on the model. pump are close coupled to Totally Enclosed Fan Cooled (TEFC) motors. pump are not self-priming and require flooded suction. cast iron Construction; EPDM/EPR Mechanical Seal and O-rings; 303 stainless steel Motor Shaft; NEMA 56J TEFC Single or Three Phase Motors; NEMA Dual Cycle 50/60 Hz Base Mounted Motor; Self-cleaning Impeller; Discharge Rotates in 45 Increments; Maximum Flow 180 GPM; Maximum Discharge Pressure 41 PSI; Maximum Working Pressure 125 PSI; Maximum Temperature 180 F; Front Drain Plugs; NOTE: Dimensions are in inches and have a tolerance of +/- 1/4". NOTE: Electric supply for ALL motors must be within +/-10% of nameplate voltage rating (e.g. 230V +/-10%= 207 to 253).

• designed for Continuous-Duty OEM, Industrial/Commercial & General Service Applications
• Examples Include: Circulation, chemical Processing, Liquid Transfer & Cooling
• Pull-From-Rear Design For Easy Service; Self-Cleaning Impeller Prevents Clogging; Max Solids 3/8"
• cast iron Construction with EPDM/EPR Mech Seal; Discharge Port Rotates in 45 Deg. Increments
• 3 HP TEFC , 3 Phase, 208-230/460 VAC/60 Hz, 8/4 Full Load Amps, 56J Frame Motor